Salvaged teak and spidery metal legs, built for a long table.
At a Glance
• Style: Industrial farmhouse with a neutral top that moves easily between other decor styles.
• Material: Reclaimed teak wood top over sculptural, spider like industrial metal legs.
• Fit: Nearly 8 feet long and almost 40 inches deep, built to seat a full table of eight.
• Best pairing: The Industrial Rustic Wood & Fabric Dining Chair Set 2, which echoes its weathered wood and metal story.
A reclaimed teak top measuring roughly 98.5 inches long rests on angular industrial metal legs.
The Reclaimed Teak Wood Rectangle Industrial Metal Legs Dining Table pairs a long reclaimed teak top with angular, spider like metal legs. It measures roughly 98.5 inches long, 39.4 inches deep, and 30.7 inches high, long enough to seat eight with room to spare. The teak top carries color variation and surface marks from its former life, while staying smooth under the hand. Cold metal and warm reclaimed wood sit in deliberate contrast across the same piece.
Dimensions
98.5"W x 39.4"D x 30.7"H
Material
Reclaimed teak wood top, industrial metal legs
A rectangular table this long sets the whole plan for a dining room. At nearly 8 feet, it needs a room with real circulation space around every side, not just enough room for chairs. The legs sit inset from the corners in a spider like arrangement, which keeps knees clear and gives the base its own sculptural presence. Seen from across the room, the thin metal legs almost disappear under the thick, solid top.
Reclaimed teak is salvaged from structures or furniture that have already lived one full life. Every board carries its own marks, cracks, and tonal shifts, so the top reads less like a factory product and more like a record of time. Despite its rough history, the surface is sanded smooth enough for daily use at the table.
The legs are cut and welded into an angular shape that looks closer to an architectural detail than standard table hardware. That hard edged metal keeps the whole piece from reading as purely rustic. It is the element that pushes the table toward an industrial farmhouse look instead of a plain cabin one.
This is the table's home base. Metal legs and reclaimed wood are the two signature materials of the style, and this piece carries both at full scale.
Set against plain walls and simple lighting, the table's contrast of raw wood and hard metal becomes the main event in an otherwise understated room.
Paired with upholstered chairs instead of wood ones, the table settles into a more traditional dining room without losing its industrial backbone.
These chairs match the table's weathered, hand distressed wood language in a grey finish with grey fabric seats. At 20 by 25 inches and just over 40 inches tall, a run of them along both long sides keeps the whole table visually consistent.
This sideboard shares the same salvaged wood story as the table top, just in a lighter, bleached pine finish. Its wide, shallow drawers give a dining room storage for linens without introducing a second heavy wood tone.
At 52 inches long on an iron industrial base, this bench echoes the table's own metal legs directly. Swapping it in on one side of the table trades two chairs for a tufted leather seat built for a crowd.
Solid reclaimed wood this size carries real weight, so plan on help and a clear path when it arrives. Wipe spills quickly and use a mild wood cleaner rather than anything abrasive, since reclaimed surfaces can be more porous than new lumber. Leave at least 36 inches of clearance on each long side for chairs to pull out fully. Because every reclaimed board is unique, expect some grain and tone variation from the photos shown here.